Price: Contact us
What does “USB” stand for?
The acronym “USB” is short for the term Universal Serial Bus, a hardware interface that was developed so that peripheral devices like computer mice, keyboards, printers, digital cameras, scanners, PDA's and MP3 players can be easily connected to PCs. Computer manufacturers first began to replace serial and parallel ports with USB ports in 1997; today, every PC on the market contains at least 4 ports for USB connections.
What are typical transmission speeds for USB cables?
Generally speaking, USB cables are classified into one of two different bandwidth groups: 1.1, which transfers data at a maximum rate of 1.5 Mbit per second, and 2.0, with a 480 Mbit per second data transfer rate. USB 2.0 is backward compatible with the lower data transmission requirements of 1.1, but the substitution can’t be reversed; 1.1 just can’t deliver the rate of data transfer that USB 2.0-rated devices need.
In addition to the bandwidth classifications listed above, USB devices can also be labeled in the following “speed” categories, which specify the amount of bandwidth they need to operate:
Low Speed: The “ low speed” rating indicates that a device requires minimal bandwidth (1.5 Mbit/s) to function, so it can be used in conjunction with either 1.1 or 2.0 USB cables. Joysticks, keyboards and computer mice are a few common examples of low speed devices.
Full Speed: Devices labeled “full speed” need a signal rate of 12 Mbit per second. Since this is such a common bandwidth requirement, all USB hubs on the market have been designed to support Full Speed. And even though the data transfer speed is higher, Full Speed – like Low Speed – transmits equally well via 1.1 or 2.0 USB cables.
High Speed: “ High speed” USB devices run at 480 Mbit per second, and require a 2.0-rated USB cable.
What does it mean when USB cables and devices are described as “hot swappable?”
One of the most convenient features of USB C PD cable and devices is their ability to be “hot swapped,” which means that they can be plugged into – and unplugged from – a computer as needed, without that computer needing to be powered down first.
Is there an organization that sets USB performance standards?